Build your own head unit
Open Hardware, Easy to Build
One of the most important goals of OpenIVI is to let you get an actual piece of hardware into a vehicle. To get you there, we provide a parts list that should help you build a test unit very quickly. We’ve tried to select parts that are reasonably priced, provide solid enough performance for a variety of applications, and are easily available for purchase.
Component |
Approximate Cost/€ |
Gigabyte J1900N-D3V |
88.00 |
8GB RAM |
58.00 |
SSD |
51.00 |
M3-ATX PicoPSU |
55.00 |
Molex → P4 cable |
4.00 |
125.00 |
|
7.00 |
|
HDMI cable |
5.00 |
Right angle DVI |
6.00 |
M3 Hex bolts |
0.10 |
M3 Nylock nuts |
0.10 |
M3 Washers |
0.10 |
12v PSU |
10.00 |
You can also 3D print a case that will fit in a standard head unit slot. The project files for that are available over at the openivi-hardware repo.